About Noel Cantenot

Noel Cantenot · 01-07-2021

Hello,I wrote the following request to get the list of Tengig interface on a catalyst 9K:https://10.200.1.1/restconf/data/Cisco-IOS-XE-native:native/interface/TenGigabitEthernet?fields=name;description The reply is like : {"Cisco-IOS-XE-native:TenGig...

Noel Cantenot · 10-14-2020

Hello, I'm trying to get the equivalent of "show ip mroute" with RESTCONF on catalyst 9500 with ios-xe version 16.12.3a.I checked several Yang modules, but it seems the only ones to have these information are MIB modules, like Cisco-IPMROUTE-MIB.I di...

Noel Cantenot · 01-13-2021

Actually, my request is more generic than only the interface name: With URL like :https://10.200.1.1:443/restconf/data/IPMROUTE-STD-MIB:IPMROUTE-STD-MIB/ipMRouteTable/ipMRouteEntry?fields=ipMRouteGroup;ipMRouteSource;ipMRouteInIfIndex;CISCO-IPMROUTE-...

Noel Cantenot · 10-20-2020

I haded a community, and it works fine !Thanks !

Noel Cantenot · 10-20-2020

Hello David, thanks for your reply.My configuration is SNMPv3 only, so I have no community configured.I will had one and test this solution.Does that mean that it is not possible to make it work with SNMP v3 ?

Noel Cantenot · 10-15-2020

I Yan,thanks for your reply.I think my issue is not at the SSL level, as this kind of request works fine (I diabled the SSL certificate verification):curl --location --request GET 'https://10.200.44.1/restconf/data/ietf-routing:routing' --header 'Ac...

Member Since	‎04-26-2019 03:07 AM
Date Last Visited	‎01-13-2021 12:33 AM
Posts	6

User Statistics

User Activity

filtering on value

Multicast and Yang with RESTCONF

Re: filtering on value

Re: Multicast and Yang with RESTCONF

Re: Multicast and Yang with RESTCONF

Re: Multicast and Yang with RESTCONF