Hello, At my firm we have to expand our stacks. We bought extra switches, same models but they came with a new ios. When we add the switch to the stack does the ios has to be the same or are the different ios compatible with eachother? kind regardsBe...
Hello, at my workplace we have 2 routers put together with VRRP into a virtual router. Router X being master and Y back-up. All our vlans have basicly the same config.A colleague of mine wanted to try somthing with a new vlan and added it on router ...
Hello, At work we're short on ports at a certain rack so we need to add a second switch using stacking module. The setup at the moment is just 1 C2960X switch and I need to add another one. Is it just plug and play and will the config from the switch...
The usb we used was a type: FAT32. did a format and switched it to normal FAT(16). after that we did the following:Copy usbflash0: IOSFileName.bin flash:IOSFileName.binboot system flash:IOSFileName.binCopy run startReloadAfter the reload the IOS was ...
We tried using a tftp server. With this tftp server we were able to upload to the tftp server but when we try to download we get the errors showed in the picture.When we try to use a usb-stick we get the message that the drive can't be found.We know ...
Hello Leo, We are having some troubles with getting another ios version on the new switches. our stacks our at 15.2(5b)E. while our freshly arrived switches have the 2.E7 ios.At the moment our switch sees the usb we put in but doesn't see the files i...
Hello Giuseppe,what if it's not a shared vlan? Since the Vlan is only known on router Y. At the moment our network is redundant. we wanted to test something and made a new vlan. We only made it on router Y so if router Y would crash every vlan would ...
The DHCP pools are made and the SVI has the ip helper-address for both of the dhcp servers. So that's not the problem. We also have a static route for the whole range (we got a /19 and split it up in different subnets but the /19 has a static route r...
