We have 2821's each with 2 PRIs. They run SIP and IOS 124-9.T6. Consultative call transfer where each call leg traverses a different gateway do not work. The transferring phone is a 7960 running SIP 7.3(8.8 didn't work either). Cisco cannot provide ...
Network of 7609s running 12.2(18)SXE3. Twoequal cost path links between each 7609. IS-IS Level 2 routers only. When pinging an off campus IPv6 host every other packet is lost. It seems like the equal cost paths prevent an alternative path off campus ...
I have a 2620XM running 12.3(13). It is a SIP environment where "normal" calling works fine. Theone problem I have is with how to configure the gateway for the REFER method used during call transfer.The flow is: PSTN user calls IP phone through the ...
I need help configuring CC-Diversion to access an Octel 350 voice mail server through a Cisco 2620XM gateway. All inbound and out bound calls work through this same gateway. Under some circumstancesan unanswered inbound call gets diverted to the gat...
Hello: I have a vBrick 4300 dual MPEG4 encoder. It support unicast & multicast delivery. Unicast works fine with QT, Real & Windows Media players.Multicast doesn't work at all and I'm hoping this group will have some useful feedback. The 4300 and...
I tried booting IOS c2800nm-adventerprisek9_ivs-mz_gw.124-15.T4.bin which supposedly contains the IP2IP gateway feature set. It will not load. The router reverts back to c2800nm-ipvoicek9-mz.124-15.T4.bin which is IP voice feature set. After booting ...
Thanks! However your response, while helpful, just adds to my frustration. Cisco says the IP voice feature set is the correct one not IP2IP gateway. They also said H.323 has nothing to do with this problem. Errr. I'll try your suggestions. Thanks!!
OK. I'll try. We have 5-7609s running 12.2(18)SXE3. Each 7609 has a variety of 100/1000Base Ethernet interfaces. They each also have one WS-X6704-10GE outof which connections to our primary and secondary backbones originate. This is how the routers a...
At 352x240, each rate control method, Target Bit Rateof 2Mbps, Target Frame Rate of either 20 or 30fps more than five clients has a noticeable impact onvideo quality. We see delays updating the image, audioout of sync and no video only audio. I've t...
