About R3Natas

R3Natas · 05-31-2019

Hello, currently I have a working DMVPN setup between my HQ and BRANCH office, on my branch side we are running Cisco CME for VoIP communications and my ultimate goal is to reach call manager from head office to connect phones. Currently I am experie...

R3Natas · 05-29-2019

Hello, currently I deployed a DMVPN setup behind NAT with one Hub and one Spoke, my architecture looks like this Hub - > Home router -> Internet <- Home router <- Spoke My goal is to route home router networks between hub and spoke sides. So for exam...

R3Natas · 05-19-2019

Hello, recently I deployed Cisco 2811 router as CME, I have several phones and computers operating on different vlans (VLAN 10 VOICE 10.111.10.0/24, VLAN 20 DATA 10.111.20.0/24). I created two subinterfaces on the router with dot1q encapsulation and ...

R3Natas · 06-03-2019

Thank you very much for your time and support, I finally managed to register my phones with CME on remote site. The problem was with the spoke's core router which was not friendly with vlans, so I decided to put a Cisco switch between core router and...

R3Natas · 06-01-2019

Currently I have configured 4 out of 24 phones and yes, I have added mac addresses of every phone to the CME, so there is no need for auto registration, but, unfortunately, phones, which are written into CME are not registering, although they are con...

R3Natas · 06-01-2019

I will try to explain as clear as possible, currently communication between Spoke and Hub works perfectly, all subnets reach each other. Static routes are done in two places on both ends:Hubip route 0.0.0.0 0.0.0.0 10.10.0.1 ip route 10.248.100.0 255...

R3Natas · 06-01-2019

Little bit of troubleshooting shows that I cannot ping Call Manager. Forgot to configure static routes, now it pings and finds CME, but wont register

R3Natas · 06-01-2019

Hello, Giuseppe, Thanks, again, for your help, I will try to play with default-metric settings, but currently I'm pretty fine with static routes configured on both sides, only problem left is VLAN's, first I thought I should route VLAN over DMVPN tun...

Member Since	‎05-19-2019 02:22 AM
Date Last Visited	‎10-24-2019 05:02 AM
Posts	14

User Statistics

User Activity

DMVPN routing issues

DMVPN Routing outside interface to tunnel

Routing sub-interfaces to the internet

Re: DMVPN routing issues

Re: DMVPN routing issues

Re: DMVPN routing issues

Re: DMVPN routing issues

Re: DMVPN routing issues