About dhanasugiri

dhanasugiri · 05-20-2011

I have Multiwan router with 1 port WAN and 4 DHCP Cable modem connected to SF 300-8. I want to connect 4 modem via VLAN through switch. I define Vlan2,3,4,5 on router also in Switch. port 1 on the router as trunk and the other port 2,3,4,5 as Vlan2,3...

dhanasugiri · 05-21-2011

Thanks, I did check to Qbalancer vendor, they succeed config qbalancer with zyxel ES 3024 through VLAN, but they never try on Cisco. I though it will be similar configuration, but is not.

dhanasugiri · 05-21-2011

The basic idea I'm doing this, because of limited WAN port on Qbalancer. So I need to create virtual lan to make connection bonding. All 4 modem has own Public DHCP from the ISP. The Qbalancer should get different ip address on each port..

dhanasugiri · 05-20-2011

Dear Alejandro,Thank you for your response. please see below configuration :as you can see above configuration VLAN port 3,4,5 should have own DHCP, but the reality I got DHCP1 on each Qbalancer VLAN port 3,4,5. I think DHCP broadcast on all port th...

Member Since	‎05-20-2011 10:34 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

help 4 DHCP Cable modem on Vlan SF 300-8

Re: help 4 DHCP Cable modem on Vlan SF 300-8

Re: help 4 DHCP Cable modem on Vlan SF 300-8

Re: help 4 DHCP Cable modem on Vlan SF 300-8