Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Visauk47
Stats
Member since
05-28-2019
22
Posts
10
Helpful
0
Solutions
11-26-2019
04:52 PM
Hi Julian, Basically I want to access the switches on cloud where I can configure and test few things and then erase the config, its like a cloud rack which is available to you 24x7, I want to setup a lab like that, but I am not sure how to do it. At present I have to be in the lab room all the time in order to test things, my office 60-70 m away from the lab room so its not convenient for me to be in the lab all the time. I dont want to use packet tracer when I have the real equipment's :) Regards, Vis
... View more
11-26-2019
01:40 PM
Hi Julian, Network access is not a problem :) I just want to know how to access all the switches at once to practice some labs and to do some testing. Thanks, V
... View more
11-26-2019
01:17 PM
Hi All, I have access to all the latest Cisco switches and I want to access all those switches from home to practice Labs, Is there any way to access all the switches which I left turned on through cloud or something ? Please let me know. Regards, Vis
... View more
- Tags:
- switching
Labels:
10-28-2019
03:46 PM
Hi Luis, Thank you for your reply. Could you please give an example of the having 4 different networks with mask 28 or divide the network into 4 different networks with mask 30, please ? Regards, Vis
... View more
10-28-2019
03:19 PM
Hi Guys, I need some help in assigning the IP addresses (172.25.25.0/28 Network) to 4 routers located in 4 different branches, I want to the LAN users to get the IP addresses from /28 network, Please see the topology attached to the message. Regards, Vis
... View more
- Tags:
- IP Addressing
Labels:
Created by
Visauk47
in Small Business Switches
in Small Business Switches
10-28-2019
02:27 PM
10-28-2019
02:27 PM
Thanks.
... View more
Created by
Visauk47
in Small Business Switches
in Small Business Switches
10-23-2019
06:21 PM
10-23-2019
06:21 PM
Sure, here is the config: ! no service pad service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption ! hostname MCA1 ! boot-start-marker boot-end-marker ! logging buffered 16000 no logging console enable secret 5 $1$Te8m$V6a6778d8m$Vsdfgdf ! username cisco privilege 15 secret 5 $1$mwSWjkjrtyr$TRn0Rd no aaa new-model clock timezone NZT 12 0 clock summer-time NZT recurring 4 Sun Sep 2:00 1 Sun Apr 2:00 system mtu routing 1500 ! ! ip domain-name testrouter.com.au ip name-server 1.1.1.1 ip name-server 1.1.1.1 vtp domain MCA1 vtp mode transparent ! ! crypto pki trustpoint TP-self-signed-369206784 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-369206784 revocation-check none rsakeypair TP-self-signed-369206784 ! ! crypto pki certificate chain TP-self-signed-369206784 certificate self-signed 01 nvram:IOS-Self-Sig#4.cer ! spanning-tree mode rapid-pvst spanning-tree extend system-id ! ! ! ! ! ! ! ! ! vlan internal allocation policy ascending ! vlan 42 name data ! vlan 342 name voice ! ip ssh version 2 ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/1 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/2 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/3 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/4 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/5 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/6 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/7 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/8 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/9 switchport trunk encapsulation dot1q switchport trunk native vlan 42 switchport trunk allowed vlan 42,342 switchport mode trunk mls qos trust dscp spanning-tree portfast trunk spanning-tree bpduguard enable ! interface GigabitEthernet0/10 description *** Uplink to Testrouter2 G1/0/17 *** switchport trunk encapsulation dot1q switchport trunk allowed vlan 42,342 switchport mode trunk ! interface Vlan1 no ip address no ip route-cache shutdown ! interface Vlan42 ip address 1.1.1.1 255.255.255.0 no ip route-cache ! ip default-gateway 2.2.2.2 ip http server ip http secure-server ! ! ! snmp-server community ROUTER snmp-server location *** Finance Building *** snmp-server contact IS Network Group snmp-server host 1.1.1.1 router sm ! ! line con 0 exec-timeout 0 0 password 7 105E1C1702121C1F5656565C55 login line vty 0 4 exec-timeout 5 0 password 7 044B1E5656565080824425A5948 login local length 0 transport input telnet ssh line vty 5 15 exec-timeout 5 0 login local length 0 transport input telnet ssh ! end
... View more
Created by
Visauk47
in Small Business Switches
in Small Business Switches
10-23-2019
05:43 PM
10-23-2019
05:43 PM
Hi All, I want to access my switch (currently installed at a remote location) from my office and I want to enable both telnet and SSH access on it with the following credential:- telnet password :- cisco 12345 ssh credentials :- username cisco privilege 15 secret cisco123 At the moment, when I am connecting through telnet its asking for a username and password and if I type SSH credentials, I can login but I dont want that, I want to use the telnet password to login, so please tell me the correct way to configure the switch. Regards, Vis
... View more
- Tags:
- Switching3560
Labels:
10-23-2019
12:57 PM
Hi Georg, Issue was with the Old name mentioned on the smtp-server location config, which I have changed. Thanks, V
... View more
10-23-2019
12:55 PM
Thanks Paul, I changed the name and can see the new name on the web GUI :)
... View more
10-22-2019
03:37 PM
Hi All, I copied the config of an Old switch to configure a new switch but when I login through https:// IP into the new switch, its showing the old location, check the screenshot attached, Is there any command to add the new location of the switch. Please let me know. Regards, Vis
... View more
Labels:
09-03-2019
12:54 PM
Hi Dinesh, Thank you for the reply. Could you please confirm, what does mss, nop,wscale sackok means ? Regards, Vishal
... View more
Public Statistics
| Date Registered | 05-28-2019 04:27 PM |
| Date Last Visited | 12-05-2019 05:49 PM |
| Total Messages Posted | 22 |
| Total Helpful Votes Received | 10 |
Helpful Votes Given To
| User | Helpful Count |
|---|---|
| 10 | |
| 5 | |
| 5 | |
| 5 | |
| 10 |
.jpg "VIP Mentor"){kind=icon}
