About FabianK

FabianK · 06-03-2019

Hi all,I recently bought a aironet 1815i air-ap1815i-e-k9c. I made sure it receives enough power and it boots up nice.I can connect to the CiscoAirProvision SSID and input my settings but after this the AP reboots and stays in the join/ discovery mod...

FabianK · 05-31-2019

I am wondering why this is happening. After the reset my AP's LED keeps cycling between red green and amber. so i cant configure through web ui. I performed the reset with the mode button and held it down for less then 20 seconds during boot.

FabianK · 05-30-2019

FabianK · 06-04-2019

I mentioned that i made sure it is not a power issue i use a AIR-PWRINJ6= PoE injector.I turned out to be a ip issue. I set a static ip in my router for the ap but i set the same ip as management ip.After changing the ip in my router it worked.

FabianK · 05-31-2019

thnx for the help!got it to work now with the longer rest.

FabianK · 05-31-2019

model: aironet 1815i air-ap1815i-e-k9cpowerd by: Cisco AIR-PWRINJ6= PoE adapter & injectorbutBut that is not the problem it was working i just had to rest it. after that i had my problem.

Member Since	‎05-29-2019 01:38 PM
Date Last Visited	‎06-18-2019 12:33 AM
Posts	6
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco Mobility Express setup problems

Can't see SSID from AP with mobility express after reset.

Will resetting a AP with mobility express(ME) to factory default remove ME?

Re: Cisco Mobility Express setup problems

Re: Can't see SSID from AP with mobility express after reset.

Re: Can't see SSID from AP with mobility express after reset.