Hi @All, how do I disable Cisco FindIT on my SG350XG?I dont want to use it at the moment but the connection tries are filling the logs of my other switches. Deleting all device groups did not work as "Default" cant be deleted. Best regards,Hendrik
Hi, we use two SG350XG-24F as a Stack as core switches and 3 SG350XG-48T as access switches.The stack members are connected on fiber ports 23 and 24. Each access switch is connected via DAC to each stack member. No LAG there.We only created a LAG on...
Hi, we use two SG350XG-24F as a Stack as core switches and 3 SG350XG-48T as access switches.The stack members are connected on fiber ports 23 and 24. Each access switch is connected via DAC to each stack member. No LAG there.We only created a LAG on...
Hi Seb, yes. The second core switch had that bridge priority but since I set this manually to 4096 like on the other core everything seems to work. Output: sw-fra-c#sh stackTopology is ChainUnits stack mode: NativeUnit Id MAC Address Role Network Upl...
Hi Seb, christmas time is fixing time ;-) I finally powered on the second core. One thing I found was that loopback-guard was disabled on the stack and the bridge priority was 32768 like on the other access switches. Here is the output: sw-fra-c#sh s...
Hi,sorry! The two 350x are stacked. I just kept stack member 02 offline/disconnected from power as this solved the network problems.I can plug it in during maintenance and collect the needed logs.Kind regards,Hendrik
09-Nov-2018 22:42:23 :%STCK SYSL-N-UNITMSG: UNIT ID 2,Msg:%SYSLOG-N-LOGGING: Logging started.
09-Nov-2018 22:41:40 :%STCK SYSL-I-UNITMSG: UNIT ID 2,Msg:%MLDP-I-CONNECT: Connection to Unit 1 is established.
09-Nov-2018 22:41:40 :%STCK SYSL-I-UNITMSG: ...