About msauvola

msauvola · 07-29-2015

Is there a way to insert a pause to wait for keyboard input when pasting a series of commands? For example I would like to paste this from a text file: Router(config)#Interface Gigabit0/1Router(config)#shutdown<pause and wait for a tap on the keyboar...

msauvola · 12-11-2012

Hi,If I do a speed test (bandwidthplace.com) while connected to a remote locations 1140 standalone access point, the download/upload speeds are roughly 100kbps.There are no other devices connected to the access point at the time.Wired PCs on the LAN ...

msauvola · 05-27-2009

Hi all,1811 router lets me get as far as "monitor session 1 source interface fastethernet" but when I finish it with the interface number "fastethernet 0"it gives me a "Invalid input detected at marker |^| pointing at the F in fastethernet.The Cisco ...

msauvola · 04-11-2005

No replies last time.With the following config I can ping both to and from hosts on the Office LAN to and from the Outside Network, but not out to the ISP.Traffic moves fine from Office LAN through NAT to and from ISP.But from Outside Network I can o...

msauvola · 04-05-2005

Here is my current config (Names and IPs changed, and snipped out the irrelevant stuff)version 12.1hostname XXXX!ip subnet-zerono ip domain-lookup!!interface Ethernet0/0 description connected to Office LAN ip address 192.168.12.1 255.255.255.0 ip bro...

msauvola · 12-13-2012

Swapped out the AP. No change.So it's somewhere farther down the line.But I have another question.In the APs web management interface, if I go to ASSOCIATION in the menu, I see 3 clients.If I click the MAC address link for each client, it brings up a...

msauvola · 12-11-2012

Scott,I have tried new patch cables.Swapping out the AP was my next move. I have a spare 1140 here at headquarters that I will take to the remote location on Thursday. I will report the results then.Thanks,Mike

msauvola · 05-29-2009

Thanks for the response.It would have helped to monitor the traffic from our remote offices when trying to analyze network slowdowns using Wireshark.In our situation, our WAN circuits are provided by another company, and they have agreed to SPAN port...

msauvola · 04-12-2005

Whoops -forgot attachment.Here it is.

msauvola · 04-12-2005

Here it is then. The whole thing staright out of the router exceptI've replaced sensitive info with XXXs and bolded (is that a word?) network numbers on e0/1 and e1/0.Thanks,Mike

Member Since	‎04-05-2005 06:31 AM
Date Last Visited	‎10-09-2017 12:16 PM
Posts	12

User Statistics

User Activity

How to pause a series of pasted commands?

How to diagnose low throughput on Aironet 1140

SPAN possible on a 1811 router ?

Another Shot

Adding E1/0 as outside LAN

How to diagnose low throughput on Aironet 1140

How to diagnose low throughput on Aironet 1140

Re: SPAN possible on a 1811 router ?

Re: Another Shot

Re: Another Shot