Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Lavundi
06-19-2019
Stats
Member since
06-06-2019
3
Posts
0
Helpful
0
Solutions
06-11-2019
01:46 AM
Hi Paul. Thank you for your fast help. Didn't realize that the 3560 is so old already with a maximum of 100Mbit/s. Problem solved :)
... View more
06-07-2019
05:46 AM
Oh yes, sorry forgot it: So I tried it on these 3 ports, without any result: FastEthernet0/1 is down, line protocol is down (notconnect) Hardware is Fast Ethernet, address is 0024.98db.a483 (bia 0024.98db.a483) Description: Meraki_MX250_WAN01 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 2d01h, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 5 packets input, 620 bytes, 0 no buffer Received 4 broadcasts (4 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 4 multicast, 0 pause input 0 input packets with dribble condition detected 37 packets output, 5860 bytes, 0 underruns 0 output errors, 0 collisions, 6 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out ____________________________________________________________ FastEthernet0/3 is down, line protocol is down (notconnect) Hardware is Fast Ethernet, address is 0024.98db.a485 (bia 0024.98db.a485) Description: Meraki_MX250_WAN02 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output never, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out _____________________________________________________________ FastEthernet0/5 is down, line protocol is down (notconnect) Hardware is Fast Ethernet, address is 0024.98db.a487 (bia 0024.98db.a487) MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Auto-duplex, Auto-speed, media type is 10/100BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input never, output 2d02h, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts (0 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 0 multicast, 0 pause input 0 input packets with dribble condition detected 1 packets output, 452 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 PAUSE output 0 output buffer failures, 0 output buffers swapped out Hope this helps. Thanks!
... View more
06-06-2019
04:00 AM
Hello together :) So I will try to explain my problem with my bad English and hope that somebody can help me with that. I just bought a Meraki MX250 for our company to replace an older Firewall and I confugured it exactly like the old Firewall just with another public IP. So far so good. But when I try to connect the Meraki MX250 over the WAN port to the Cisco 3560 switch, nothing happens. I don't get any link and the port on the 3560 says that nothing is connected. I have resetted the port already, also the Firewall. But still nothing. When I connect the Firewall to another office Switch, it is working without any issues. The port on the 3560 is also not broken or something because when I connect something else on it, I got a link too. So both connections are working with different devices. I can't just get it why I don't get any link when I connect the firewall to the 3560 switch. And yes, I need this switch, because it is the switch between our internet and the company network. So far Daniel
... View more
- Tags:
- 3560
- c3560
- C3560-48ST
- cisco
- connection lost
- firewall
- help
- link
- meraki
- MX250
- no
- no connection
- no link
- not working
- switch
- uplink
- wan
Labels:
06-11-2019
Hi Paul.Thank you for your fast help. Didn't realize that the 3560 is so
old already with a maximum ...
06-07-2019
Oh yes, sorry forgot it: So I tried it on these 3 ports, without any
result: FastEthernet0/1 is down...
Public Statistics
| Date Registered | 06-06-2019 02:43 AM |
| Date Last Visited | 06-19-2019 12:35 AM |
| Total Messages Posted | 3 |
.jpg "VIP Advisor"){kind=icon}
