HiI have a question, when you migrate from version 11 to 12.5 (smart license), do we need to buy new licenses for the version 12? or the TAC can migrate the license 11 to 12 with the Software support ?or maybe we have to buy some upgrade license ver...
Buenas TardesTengo una duda, tengo un switch 6509-E con dos supervisoras VS-S720-10G, una de ellas fallo y se solicito una nueva parte, ahora tengo que colocar esta nueva supervisora, pero lo mas seguro es que no cuente con el mismo IOS, en ese caso ...
HiI have a doubt, I have a switch core 6509-E with two supervisor. One of them has failed. So I requested for a RMA to change the part, but maybe this new supervisor is gonna have another IOS version, But I know that both supervisor has to have the s...
Hi I have a problem, I have a switch 6509 with two supervisors, one of them was with alarm, so I entered to the device by console, and it was in mode rommon, so what I did was to make that load the image, after I rebooted the device, all the led turn...
I have a problem with ssh, I have a switch 6509, and it had two supervisors, one of them failed, and after that I could not enter to the switch by SSH.Here is the configuration and the show commands that I put.aaa new-modelip domain-name sedapaldc.co...
Hi Sandy I tried what you told me but it does not work, the only thing that I havent tried is reboot the device, because is a core. I dont know if it has relation with the other supervisor ut that stop working. but I dont think so, do you have any an...
Hi sandy, thanks for answer me, I have a question what is the key_name and the key_size?, because when I configure, I put the hostname, ip domain, aaa new model, and the crypto key generate rsa 1024.
