About donnabarney

donnabarney · 12-13-2012

I'm trying to set up a Cisco ASA 5505 and need some help with routing. I'm mainly setting things up through ASDM but I also have console access. Right now while I'm setting it up I have the outside/Vlan2 port attached to my existing network and a lap...

donnabarney · 12-14-2012

Thanks a lot cadet alain. Adding an icmp exception did the trick. However, I just realized that the laptops on the 153 subnet can't ping each other. I tried adding a similar icmp exception on the inside interface but that didn't seem to work. Is that...

donnabarney · 12-14-2012

Well right now just for while we're learning how to set it up, we have the Cisco ASA 5505 outside port connected to our existing local area network. Although our Comcast cable modem acts as the DHCP server on our network, I statically assigned the ou...

donnabarney · 12-14-2012

ciscoasa# show run natnat (inside) 1 0.0.0.0 0.0.0.0ciscoasa# show run globalglobal (outside) 1 interfaceciscoasa#I'm not sure if I understand your question, but the only subnet I have on the inside interface is the 153 subnet. Nothing on the 153 sub...

donnabarney · 12-14-2012

This is what show nat tells me: ciscoasa# show natNAT policies on Interface inside: match ip inside any inside any dynamic translation to pool 1 (No matching global) translate_hits = 0, untranslate_hits = 0 match ip inside any outside any ...

Member Since	‎12-13-2012 03:29 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Need Help Setting Up Routes on a Cisco ASA 5505

Need Help Setting Up Routes on a Cisco ASA 5505

Need Help Setting Up Routes on a Cisco ASA 5505

Need Help Setting Up Routes on a Cisco ASA 5505

Need Help Setting Up Routes on a Cisco ASA 5505