I recently got hired as a network admin at a small company. They have a single ASA5505 running 8.2(5) as the core layer 3 and DHCP server. The network also includes four layer2 switches that operator as unmanaged on vlan 1 ONLY. My employer is not...
I tried spining up a sandbox today, the "setup is complete with error" and I did not receive any emails confirmation. Is this an internal error or something I am doing wrong?
Hey guy. I found the problem. It was the native vlan. On a switch / router the native vlan is default to vlan 1. BUT on a ASA 5505, once u setup a trunk link, u have to set a native vlan, other there will be no native vlan for trunk. The same thing ...
Thanks for the feedback. Yes the license is a Security plus. These 5505 does not not support sub-interfaces so I cannot use (e0/1.10). i would have to setup SVI's with a trunk link. but even that is not working.
Thanks for the reply. I did as you suggested and removed the specified vlans but still not working. I did exclude some of the configurations. like nat and the vlan 2 (outside/public interface) config. but I no these are working.
Yes I forgot to mention but all switch are connected via trunk links and also the switch that is connected to the ASA is also a trunk link. I am aware that on the ASA 5505 all the ports are switch ports. so I also have the inside port (e0/1) of the...