About SebastianCampos7906

SebastianCampos7906 · 07-18-2019

Hi i have a switch cisco and i have a problem, let me explain. I have multiples servers(hosts) connected to the cisco that deliver a stream service so far so good but when i connect physically a new cable or when i make noise in the switch (up/down s...

SebastianCampos7906 · 07-04-2019

Hi we have a problem, i have a switch multicast and when i connect a port the other ip multicast is reboot Jul 4 09:36:28.371: IGMPSN: Locate gce 0100.5e02.0202, on Vlan 1Jul 4 09:36:28.371: IGMPSN: locate group 224.2.2.2, on Vlan 1Jul 4 09:36:28.371...

SebastianCampos7906 · 07-20-2019

I do that you say, and it's work like for 8 hrs but the server have again fall and i don't know what can be the problem. I attached a txt with a log, like de 19:20 to 19:25 the servers loose the connection. I hope you can help me.

SebastianCampos7906 · 07-18-2019

if i activate that i have to disabled the portfast of the interface?, let me explain interface GigabitEthernet0/1speed 100spanning-tree portfast edgespanning-tree bpdufilter enable like this?, i have to disabled bpdu?

SebastianCampos7906 · 07-18-2019

of course, i attached a txt with the running-config.Root Hello Max FwdVlan Root ID Cost Time Age Dly Root Port---------------- -------------------- --------- ----- --- --- ------------VLAN0001 32769 acf5.e620.9d00 0 2 20 15 The sh.

SebastianCampos7906 · 07-18-2019

Hi, yes i have a stp and i using portfast

SebastianCampos7906 · 07-12-2019

Hi i have a similar problem with the difference that my port is down and up when i make changes physical as internal changes but all my ports is in "edge", can you help me?. Sorry for revive the post.

Member Since	‎07-04-2019 12:43 PM
Date Last Visited	‎07-31-2019 12:35 AM
Posts	8

User Statistics

User Activity

Problem with muticast in switch

Channels down/up

Re: Problem with muticast in switch

Re: Problem with muticast in switch

Re: Problem with muticast in switch

Re: Problem with muticast in switch

Re: Multicast flooding