About eggoeater

eggoeater · 05-26-2011

Hi,I'm looking for what's typical (best-practices) for wiring a modem that is delivering multiple static IPs.Right now my business has a cable modem (no NAT or DHCP on it) with a single ethernet jack and a single static IP. That jack is wired to an ...

eggoeater · 01-29-2011

This is on a 3640 running 12.4.25.We have four POTS lines running into FXO cards.One of the lines is our fax line (we rarely get faxes) which is on voice-port 1/1/1.The fax machine itself is attached to an FXS card, voice-port 2/1/1.On the fax machin...

eggoeater · 11-17-2010

So I'm trying to configure some translation rules as spelled out in this article:http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtmlHowever my hardware is an older 3640 which only has enough memory to r...

eggoeater · 07-26-2010

I've got a fairly simple lab setup: CCM 4.3 with two phones. The phones are 5555 and 6666.I've also got a 2651XM gateway running 12.3(14). All communication between CCM and the gateway is H323.I'm trying to place a call from phone 5555 to the gatew...

eggoeater · 10-08-2008

A couple years ago I had a huge HTML page that had all the AXL calls, responses, data objects passed, etc.etc. I can't find it now on the web site. All the AXL docs on Cisco.com are very general; are there any reference docs on the different AXL call...

eggoeater · 02-01-2011

>this should make the fax ring.Yes, it does make the fax ring, but from the calling phone, I hear a dial-tone at the same time as the ringing.It's like the calls is getting two separate outbound dial-peers or something.ThanksSteve

eggoeater · 01-30-2011

Thanks for your help.The point of the plar on the FXS port is to connect to the outside dial-tone as soon as it goes off hook.I'm still confused about the local bypass.Wouldn't I want to use local bypass? Why would I want to turn it off?I guess I'm j...

eggoeater · 11-19-2010

Thank you for explaining, that makes perfect sense.So not to take up more of your time, but can you think of any way to solve this problem without upgrading IOS?Is there a way to configure it so an outgoing call from a specific extension always goes ...

eggoeater · 11-19-2010

Thanks for replying!Sorry I didn't state my end goal, which is to map a line on my Cisco IP phones to a specific POTs line.So if I dial 9+number on my IP phone, my call always goes out the same POTs line.>Reading your call flow to me it sounds like D...

eggoeater · 07-26-2010

Thanks Ahmed!That worked; the destination phone rings.But now I have a new problem: When I answer the destination phone (6666) the originating phone (5555) doesn't "see" the connection. i.e. it keeps playing the ringing sound. However, when I hang u...

Member Since	‎10-03-2006 10:37 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	14

User Statistics

User Activity

Wiring for a modem with multiple static IPs???

Question on mapping voice-port; getting dial-tone and ringing

Translation Rule problem on IOS 12.2.46

Trouble sending call from CCM to Gateway and back to CCM

AXL reference doc??

Re: Question on mapping voice-port; getting dial-tone and ringin

Re: Question on mapping voice-port; getting dial-tone and ringin

Re: Translation Rule problem on IOS 12.2.46

Re: Translation Rule problem on IOS 12.2.46

Re: Trouble sending call from CCM to Gateway and back to CCM