About beatinger

beatinger · 08-04-2020

I am using a Cisco ASA5540 firewall, and I would like to know which VPN solution would be the ideal choice for using RDP to remove into a Windows 2019 Server. There are three different types under the VPN Wizard, in the ADSM, and I am not sure which...

beatinger · 08-04-2020

I currently have the following ACL. I am unable to ping any server at any external/public IP. I am not sure why.How would I go about fixing this? Thank you very much! access-list outside_access_in extended deny ip 51.222.38.0 255.255.255.0 any4acc...

beatinger · 07-25-2020

Yesterday, a very strange incident occurred, which led to the partial loss of my ASA5540 configuration. The building in which our servers are housed, suffered a power outage of some type, and when the power came back on, and the ASA5540 rebooted, it...

beatinger · 06-26-2020

Hello Cisco Community, I know this must be very simple, but I am having trouble getting this working. I was wondering how I could go about creating a Network object group, and then editing it from time-to-time to add new IP addresses to Deny from ou...

beatinger · 06-19-2020

I was wondering if it was still possible to purchase a Botnet Filter License for an ASA5540. Does anybody know how and where this is done? Please let me know. Thank you very much! Following are are the particulars of my hardware:Hardware: ASA5540-...

beatinger · 08-08-2020

Okay, so I am having some additional issues with the implementation of VPN on our Cisco 5540 firewall. I tried to locate and download the AnyConnect client for the Windows 10 desktop computers, and I found that there is something offered by Microsof...

beatinger · 08-05-2020

Hello Colby, I tried your suggestion and many other combinations, and nothing except the following kept working (for ALL hosts): access-list outside_access_in extended permit icmp any any I kept trying to use your examples, but could not figure out ...

beatinger · 08-05-2020

How is the ACL modified to allow pings to just a specific server?Also, do you know if there is a rate limiter somewhere that I can use to limit the amount of times an IP can be blocked and then SHUNNED, or something.I have an IP that is nailing our n...

beatinger · 08-05-2020

Hello John, It appears that I have 10 AnyConnect Premium Peers, so this is plenty for us: ciscoasa5540(config)# show versionCisco Adaptive Security Appliance Software Version 9.1(7)32Device Manager Version 7.8(2)151Compiled on Tue 04-Sep-18 08:37 by...

beatinger · 08-05-2020

Hello Colby, Thank you for all of your suggestions. I found that I could not change the existing configuration line from "echo-reply" to "echo request." I would receive an error, pointing at the word "request." So, I used the ASDM to "+Add" a new ...

Member Since	‎07-08-2019 04:41 PM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	51
Total Helpful Votes Received	1

User Statistics

User Activity

VPN Type to use With Windows RDP Client

ICMP Pings Blocked

Lost Configuration on Power Outage

Block IPs Using a Group-ASA55XX

Botnet License for ASA5540-K8

Re: VPN Type to use With Windows RDP Client

Re: ICMP Pings Blocked

Re: ICMP Pings Blocked

Re: VPN Type to use With Windows RDP Client

Re: ICMP Pings Blocked