Hi, I'm attempting to setup Email Settings on my SG350x-48 through FindIT. When I test connectivity (which I know works), I get the following. This a single site so Probe and Manager are the same. Any ideas on how to fix this?
Hi Dave, Thanks for the update. Just to be clear... the switch I'm connecting to has multiple IPs (see image). I can manage the switch from any of them. However, the network probe only works from VLAN1 IP. Times out when I try it from the others. Don...
Hi Dave, Yes, I am in a different subnet than the switch, on the other side of the router, administering the switches remotely. I have 4 SG350x switches. All the SVIs have more than one active IP (192.168.1.x for VLAN1 and 10.235.100.x for VLAN100 - ...
Hi Dave. I had pruned VLAN1 from all the trunks for security reasons. Once I re-enabled the default VLAN1, Network Probe began working properly. From what I can tell, It wants to connect to port 4443 on only the VLAN1 interfaces (192.168.1.x) on the ...
Hi Dave. Thanks for your response. Decided to update the SG350x-48 to 2.5.0.83 after hours last night and try your solution. However, now when I click FindIT from the web interface, it tries to redirect to https://<switch_ip>:4443 but just times out....
