Hi, May i inquire if dot1q and isl can work on the same network (i.e. switch to switch connection are ISL and my AP to switch connection is Dot1q).Antbody here who have tried this setup. Does it work?Thanks.
HI Reza,1. Router> enableway to2.copy tftp bootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin copy tftp slavebootflash:s72033-advipservicesk9-mz.122-33.SXI2a.bin3.show version | inc image show bootvar show redundancy show issu state detail4. is...
Hi sir, Do i have to create a separate vlan for the dot1q trunk connected through AP? Or i can directlty have the ap have the same vlan but different encapsulation (i.e dot1q). Because when i tried to put the ap on the same vlan but different enc...
Hi Alex, Connect to the CAS via console or SSH and use service perfigo config at the CLI to change management vlan, ip and others. See CAS user guides at the cisco website for more details.Regards,Dan