About AbdullaSharaf0291

AbdullaSharaf0291 · 08-04-2019

Hello, Dears I have set-up a small network based on two cisco 2960xr switches with IP Lite IOS. what I am trying to achieve is to ping Sw2(IP: 192.168.101.2) from a directly connected PC (192.168.204.3) that is getting assigned with an IP address fro...

AbdullaSharaf0291 · 09-19-2019

Thank you as running program as Admin in windows 10 solved permission issue.

AbdullaSharaf0291 · 08-04-2019

Thank you for your reply Martin, you are absolutely correct. However, my IOS is (c2960x-universalk9-mz.152-2.E7/c2960x-universalk9-mz.152-2.E7.bin) which is a IP light version and accepts some L3 commands in which I was recommended above to define th...

AbdullaSharaf0291 · 08-04-2019

Hi Giuseppe, Thank you so much for taking the time to view my case. issue has been resolved directly after defining the static route:ip route any any 192.168.101.2 . I also took your recommendation not disable route-cache cef and will remember th...

AbdullaSharaf0291 · 08-04-2019

I am able to resolve half of the issue which is pinging PC from Sw2 which is by configuring vlan40 with an ip address. but the main thing I am trying to accomplish is to ping Sw2 from PC so that I can also telnet to it directly. currently Sw1 is work...

Member Since	‎08-04-2019 01:56 AM
Date Last Visited	‎09-25-2019 12:21 AM
Posts	5

User Statistics

User Activity

Can't ping a Directly Connected Switch

Re: %error opening tftp (permission denied)

Re: Can't ping a Directly Connected Switch

Re: Can't ping a Directly Connected Switch

Re: Can't ping a Directly Connected Switch