This is possible with a version that supports the Cisco-IOS-XE-identity-oper module.
I tested it in the lab with version 17.6 on a Catalyst 9300-24T.
Switch# show version
Cisco IOS XE Software, Version 17.06.01
Cisco IOS Software [Bengaluru], Cata...
Thanks for the details kozharov.
With all the information so far and the evidence we can only conclude that the whole setup at startup is too much for the memory. Nevertheless, if the customer agrees at any point into gathering further details, I w...
Hello kozharov,
Thanks for attaching the outputs, I saw that many participants in this post asked for:
show processes memory platform sorted location r0
Nevertheless this command shows the platform memory from the Linux Kernel perspective, that m...
Hello kozharov,
The log for the memory usage refers to Chunk Manager, this book explains in detail what is Chunk Manager:
Inside Cisco IOS Software Architecture (CCIE Professional Development Series)
For simplicity sake, let's just keep in mind tha...
Hello Noel,
I setup a quick lab with a C9500-40X and version 16.12.3a:
LAB_Switch# show version | begin Switch Ports Model
Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ...
