About bas123

bas123 · 03-03-2020

Hi,I got image with version 15.6-3.M4 and dont have MIB for this. I want to monitor RSSI values with SNMP.I dont know right OID for this. Can someone help? ir800-universalk9-mz.SPA.156-3.M4

bas123 · 11-17-2019

Hi,Can someone help me how to configure a IR829 for WAN failover to cellular 0 and vice-versa depending on network presence or failureThanksBas

bas123 · 08-18-2019

Hello,Is it possible to configure Cisco IR829 router as Softether VPN Client?If yes, can anyone please suggest how.Thanks

bas123 · 08-16-2019

HelloCreate a simple network as shown in the figure. Need config for IR829 and Catalyst 3560 (be specific to these devices), so that a PC as end user be able to ping to the router.Thanks

bas123 · 08-14-2019

vHi,I want to connect multiple hosts via catalyst 3560 switch to Ge1 interface of IR829.I have already created a VLAN 10 at Ge1 with IP 192.168.10.254.How do I configure the switch to make it work in this scenario? My other settings for cellular and ...

bas123 · 11-20-2019

Hi @Georg Pauwen,I see the problem is in this lineip route 0.0.0.0 0.0.0.0 GigabitEthernet0 track 1With this, "sh track" always shows DOWN as it don't help data pass pass through Gi0.And this statement is in correct,ip route 0.0.0.0 0.0.0.0 GigabitEt...

bas123 · 11-19-2019

Hi,Yes I get IP address at Gi0 and even LED is Green.When I take WAN cable out of Gi0, it still keeping IP and status as UP. It's behaving weird.How could I know what medium its using while I ping/access internet?sh track - always showing Reachabilit...

bas123 · 11-18-2019

Hi @Georg Pauwen ,Thank you for your reply.I have followed almost same config as yours except WAN port. I am using Gi0 instead of Gi5, as I am connecting through SFP.Issue: I couldn't get internet (ping 8.8.8.8) even when connected to WAN only withou...

bas123 · 11-17-2019

Hi,Its working again as on PC I put IP, DGW and DNS values.Previously DNS 8.8.8.8 was missing.

bas123 · 11-17-2019

Hi @Georg Pauwen Your previous reply helped me to solve the issue and it worked.Today again I am using the same updated config, but having same issue again.I couldn't understand why its not working. I am able to ping 8.8.8.8 but couldn't access inter...

Member Since	‎08-07-2019 08:32 PM
Date Last Visited	‎03-04-2020 12:17 AM
Posts	13

User Statistics

User Activity

Correct OID (MIB file) for RSSI from IR829

IR829 WAN failover to Cellular and viceversa

Cisco IR829 router as Softether VPN Client

Simple network including IR829 and Catalyst 3560

Connect and configure switch Catalyst 3560 to Ge1 of IR829

Re: IR829 WAN failover to Cellular and viceversa

Re: IR829 WAN failover to Cellular and viceversa

Re: IR829 WAN failover to Cellular and viceversa

Re: IR829 how to access internet via Gi1-4 using cellular 0

Re: IR829 how to access internet via Gi1-4 using cellular 0