About sawesa

sawesa · 03-06-2020

Hello,I hope someone can help me with this capture.I have an ASA configured to authenticate towards an AAA server, with the following config:aaa-server RAS-Server protocol radiusaaa-server RAS-Server (if-inside) host 10.10.6.5key *****authentication-...

sawesa · 08-08-2019

Hello all, I'm new in this community, thanks for your help in advance. I have a switch Catalyst 2960-X (specifically C2960X-24PSQ-L) that has been taken from one location and I have no idea what the enable password might be.So I have followed the pro...

sawesa · 02-24-2021

Hi @Marius Gunnerud , Thanks a lot for your help. Someone went to the datacenter and connected the interface so now it's up. For more clarity, the host from AWS that is the one that has to access the ASA, I will call AWS_host (10.15.1.2) The VPN pat...

sawesa · 03-13-2020

OK, so after a lot of struggle now Im told by Cisco engineer that tunneled traffic cannot be captured. This is probably very basic but I'm surprised that it took this long to be spotted Thank you all for your kind help

sawesa · 03-09-2020

Thanks for your suggestions, but none of them worked. I spent one hour in webex session with Cisco tech engineer, but no luck. show capture capture capin type raw-data interface if-inside [Capturing - 0 bytes] match udp any host 10.10.6.5 capture c...

sawesa · 08-13-2019

So it was indeed a hardware problem!!A colleague of mine helped me out, we opened the device, located the switch under the mode button which was totally loose. He soldered it back to its place. Then the problem we had is that once we put everything...

sawesa · 08-09-2019

Yeah I'm holding it all the time while the loading just keeps going...Any other suggestion? I'm very reluctant to accept this is a hardware issue :(

Member Since	‎08-08-2019 02:04 AM
Date Last Visited	‎03-10-2021 08:29 AM
Posts	7

User Statistics

User Activity

I cannot capture Radius traffic!

SW Catalyst 2960 mode button does not interrupt boot process

Re: How to use a VPN alternative connection as management path

Re: I cannot capture Radius traffic!

Re: I cannot capture Radius traffic!

Re: SW Catalyst 2960 mode button does not interrupt boot process

Re: SW Catalyst 2960 mode button does not interrupt boot process