About NMDSIO73

NMDSIO73 · 08-16-2019

Hello, I'm setting up a new UCS chassis with some B200M5 blades VIC1440.Connecting these blades for boot on san on VNX backend worked with no issue and setup of esxi 6.5 worked perfectly. Just facing right now an issue for connecting those blades to ...

NMDSIO73 · 08-22-2019

We are going to open one. Just to confirm, switch VIC 1440 to VIC 1340 on the B200M5 works with vplex. Thanks for you help.

NMDSIO73 · 08-21-2019

I have installed esxi 5.5 U3 cisco custom on that blade instead of 6.5, same result. I have then migrate the profile to an other blade but a B200M3 with VIC1340 and fnic Version 1.6.0.37 and suprise ! I can see my VPLEX with no errors .... So :B200M5...

NMDSIO73 · 08-19-2019

Here it is : First Nexus :zone name Z_ESXi-PR-A_VPLEX-1 vsan 411* fcid 0x5d01a1 [pwwn 20:00:00:25:b5:10:0c:04] [ESXi-PR-A]* fcid 0x5d0080 [pwwn 50:00:14:42:c0:39:78:01] [VPLEX-1-A1]* fcid 0x5d00a0 [pwwn 50:00:14:42:d0:39:78:01] [VPLEX-1-B1] Second Ne...

NMDSIO73 · 08-19-2019

Hi Kirk, So you have 2 storage array systems connected to FC switches above the FIs (VNX, VPLEX) connected to the same blades?- Yesy that's right with VNX working Are you using same vHBA, or do you have one set of vHBAs defined for each storage syste...

NMDSIO73 · 08-18-2019

Hi Kirk, So you have 2 storage array systems connected to FC switches above the FIs (VNX, VPLEX) connected to the same blades?- Yes that's correct, with one working perfectly (VNX) Are you using same vHBA, or do you have one set of vHBAs defined for ...

Member Since	‎08-12-2019 05:58 AM
Date Last Visited	‎08-27-2019 06:58 AM
Posts	6

User Statistics

User Activity

UCS B200 M5 - ESXi/HBA FNIC issue

Re: UCS B200 M5 - ESXi/HBA FNIC issue

Re: UCS B200 M5 - ESXi/HBA FNIC issue

Re: UCS B200 M5 - ESXi/HBA FNIC issue

Re: UCS B200 M5 - ESXi/HBA FNIC issue

Re: UCS B200 M5 - ESXi/HBA FNIC issue