About danmand

danmand · 07-23-2020

I'm trying to add a newly created VLAN to an existing trunk port.Logging into the web GUI, I go to CONFIGURATION / PHYSICAL INTERFACESI then click on port and get a pop up window called Ethernet Interface SettingsThen Port Settings tabHere's what I s...

danmand · 08-13-2019

Hello folks.I'm working for an organization that has multiple SG300 switches and 4 VLANs (VLAN10, 20, 30, and 40).I'm at a point where I need to add a new VLAN to the existing network but I've never done it before.I've been able to create a new DHCP ...

danmand · 07-26-2020

Thank you so much for you help but I was able to log into the CLI. I was using SSH instead of Telnet. Oops. :)

danmand · 07-24-2020

Thank you for the suggestions although I was hoping I wouldn't have to do it with the CLI.About a year ago, I had help from a Cisco Engineer to setup this switch. It even took him a few days to work out the issues I was having. I wrote down the user...

danmand · 08-15-2019

So looking at my previous posts, I forgot to mention that I'm new to VLANs and switches. So far I've only worked on small office networks. So problem number 1 that I'm noticing is that when I telnet into the SG300, I get a DOS type menu (sorry, I don...

danmand · 08-14-2019

Thank you for your response.The router being used is an Adtran Netvanta 4430. It currently has 4 sub interfaces setup for the different VLANs. The IP addresses are:192.168.10.0/24192.168.20.0/24192.168.30.0/24192.168.40.0/24 I've created a 5th VLAN...

Member Since	‎08-12-2019 02:49 PM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	6

User Statistics

User Activity

Catalyst 3650 Add VLAN to Trunk

Creating new VLAN on SG300

Re: Catalyst 3650 Add VLAN to Trunk

Re: Catalyst 3650 Add VLAN to Trunk

Re: Creating new VLAN on SG300

Re: Creating new VLAN on SG300