Hi @udo.konstantin ,
You should be able to do it in Pod 2, as if you'd move it without changing the hostname.
When rebuilding the APIC, run the commands acidiag touch clean, acidiag touch setup, and reboot the APIC. In the setup script, keep all valu...
Hi @udo.konstantin ,
You'd better change the hostname before Decommission/Recommission.
Try the following:
- Decommission the APIC
- Rebuild the APIC with the old name
- Add it to the cluster
- Change the APIC name (System>Controllers>apic-X>General)...
Hi @AJ Cruz ,
Are you sure using the right image file for your deployment type?
tools-msc-2.2.4e.tar.gz for Python Environment preparation and msc-2.2.4e.ova for the MSO image (not esx-msc-2.2.4e.ova).
Hi @MobyDick ,
I don't think QSFP-40G-SR4-S supports anything else than 40G Fullduplex, so not sure what you would like to negotiate anyway.
Also you need at least 6.2.6.
Hi @Sergiu.Daniluk ,
OK but that's not really the point. Let me rephrase it differently:
Option 1 is fully supported with Vlan Scope Global as long as you set an Encap Vlan in EPG "GW" which is different from the Encap Vlan in EPG "Servers". No matte...