About SanketPatil2481

SanketPatil2481 · 08-27-2020

Hello, We are planning to upgrade an SG300-10P 10-Port Gigabit PoE Managed Switch to the latest firmware, and in our network, there are like 7 SG300 switches which are running the firmware from 2013. So, after we do the firmware upgrade on one of th...

SanketPatil2481 · 02-08-2020

Hi, There were some issues in the connection on nexus-5548 it was due to the Eth1/5 interface of the cisco nexus-5548 which went down suddenly. The troubleshooting done was to re-seat the optics present on that interface. But, this interface has nev...

SanketPatil2481 · 11-25-2019

At a location, the ISP has activated 1 Gig bandwidth of internet, and the connection from the ISP is terminated with fiber connection at a Cisco C2960CG. So, on this Cisco switch C2960CG, how would I check if I am receiving 1 Gig of bandwidth? Any co...

SanketPatil2481 · 10-07-2019

Hi, I had configured a bundle-ether interface configuration for a specific vlan on a cisco ASR-9001 chassis router, and after about an hour, the router was hard down and was rebooted and up online. What could be factors/reasons for having the router...

SanketPatil2481 · 08-22-2019

Hi y'all, I am working out on the Cisco ME 3600X and Cisco 3400 series switches platform. I wanted to know, How to find the the distances of the SFPs used in a Cisco 3400 and Cisco ME 3600X switches, that is, is there any command which I could use to...

SanketPatil2481 · 08-23-2019

Thanks Reza. This suggestion really helped! Sanket..

SanketPatil2481 · 08-23-2019

Giuseppe, Actually, I tried out just typing "DWDM-SFP-XX.XX" and then with the help of filters, I found out the distances specific to the SFP. Your suggestion helped. Thanks so much!! Sanket..

SanketPatil2481 · 08-22-2019

Hi Giuseppe, So, as per your suggestion, I tried entering a couple of entries after refering to the data sheet and typed in the exact Product ID in the matrix tool search, with no luck. I would try some more entries. Attaching some screenshots as to ...

SanketPatil2481 · 08-22-2019

Hi Giuseppe, Thank you for this very useful suggestion. Although, I tried doing the show inventory command and I have the PID and the serial number, and when I check it in the optical matrix tool, it says no results. I use the PID which is for eg. D...

Member Since	‎08-22-2019 07:26 AM
Date Last Visited	‎10-28-2020 07:23 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

Compatibility Issue question for SG300-10P 10-Port Gigabit PoE Managed Switch

Cisco Nexus 5548 Ethernet 1/5 went down suddenly.

How to check the 1 Gig bandwidth on Cisco C2960CG?

Cisco ASR 9001 down for a brief time, then back up after configuring a bundle-ether config.

Finding distances from the SFPs..

Re: Finding distances from the SFPs..

Re: Finding distances from the SFPs..

Re: Finding distances from the SFPs..

Re: Finding distances from the SFPs..