About merzroger

merzroger · 09-08-2019

Hello... I'm obviously missing something basic so hopefully someone has the time to take a look and help figure out what I missed in the Cisco manual pg 1 para 1. C2921 15.7.3.M3 -- 2- inside int - 2 sub-net, 1-outside int dhcp. Base router config, w...

merzroger · 09-10-2019

DING! Light bulb on. Thanks John! It would seem I've managed to use the same IP as my cable modem 192.168.100.1. That poor router in the middle running RIP must have had it's head spinning. And when I was bypassing it, the cable modem was next hop bo...

merzroger · 09-10-2019

...this is a router. There is no FWSM. Why would it require NAT to forward pkts? Anyway, tried NAT twice still won't pass traffic. I'll be giving up soon and prolly just get an ASA. Thanks for all the help!

merzroger · 09-09-2019

Default route is picked up fine from DHCP. Route entered in table properly. Can ping anywhere from console. No NAT, never was. First things first. Really just trying to get this thing to pass traffic. My understanding is the 2921 was designed to pass...

merzroger · 09-09-2019

...to add, I just created separate c-map and p-maps and zp's w/ new service-policy so no sharing between policies. Same result except first pkt of a ping now gets logged as DROPPED by the c-map class-default - drop - log. No subsequent pkts get logge...

merzroger · 09-09-2019

...here you go. No NAT, never was. Thanks!R1#sh runBuilding configuration...Current configuration : 2954 bytes!! Last configuration change at 08:59:19 EDT Mon Sep 9 2019!version 15.7service timestamps debug datetime msec localtimeservice timestamps l...

Member Since	‎08-29-2019 08:05 PM
Date Last Visited	‎09-11-2019 02:19 AM
Posts	6

User Statistics

User Activity

c2921 ZFW won't allow traffic back in

Re: c2921 ZFW won't allow traffic back in

Re: c2921 ZFW won't allow traffic back in

Re: c2921 ZFW won't allow traffic back in

Re: c2921 ZFW won't allow traffic back in

Re: c2921 ZFW won't allow traffic back in