Hi All,I am facing strange DHCP conflict issue .Users are getting IPv4 address conflict on their systems frequently. Upon check the details (Microsoft error code 4199) i observed that all the users are getting conflict with different IP's but same MA...
Hello All,We have an IAS (Internet Authentication Server) to authenticate all our network devices. This server is integrated with our local AD server so that we can use our domain credentials to login into the netwoerk devices. i have successfully co...
Hello All,I am facing weired problem with one of our VPN tunnel. We have around 10 tunnels configured in our ASA 5520. Specific hosts are allowed in interesting traffic from both the end and are able to ping each other. But unable to telnet on some s...
Hi All,We ahve aroung 10 site to site VPN's configured in our CIsco ASA 5520 & i want to disable one of the VPN without deleting its phase1 & phase ll configuration. What is the command to disable the same.Thanks in Advance.Regards,Amit Rane.
Hi All,We have recenly configured site to site VPN tunnel between Mumbai & WDC, but traffic is not flowing through the tunnel. After executing "sh crypto isakmp sa" command on FW getting below msg.6 IKE Peer: 66.151.98.66 Type : user ...
Thanks for your inputs.This is the last option we can use as it will include downtime as well as assigning all the ports in access switches in new VLAN.
Shone,Thanks for your reply. I have tried by enabling ils (tcp/389) port but still unable to telnet after removing access-list on inside interface. Also is there any way i can modify default globlal_policy?Regards,Amit.
