Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,N7K has 10 BGP neighbors.How to advertise only summary route to 2 bgp neighbors only. all routes should be advertised to rest of the 8 bgp neighbors. aggregate-address xxxx xxx summary-only advertises summary route to all neighbors. how to adverti...
What is cisco SFP part number for "1Gbase-CISCO-AVAGO". I am unable to find by "1Gbase-CISCO-AVAGO" or "SFBR-5780APZ-CS2" on cisco.com ccw or https://tmgmatrix.cisco.com/.Ethernet1/1transceiver is presenttype is 1Gbase-CISCO-AVAGOname is CISCO-AVAGO...
Hello, i am new to ansible. I have to create ansible script to send cli commands over json-rpc nxapi. need to do following: Task#1: int vlan100 ip address 11.11.11.1/24 desc "Test" no shut Task#2: show cdp neighbor could you help me with ansible scri...
I've N7K1 and N7K2, both have auto-recovery enabled.initial state:N7K1 - vPC primaryN7K2 - vPC secondary1. I am performing h/w upgrade so I am bringing down N7K2 (vPC secondary) and bring up n7k2 (vPC secondary) after h/w upgrade with all ports shutd...
Hello, Need help with sampled netflow explained in below link: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus6000/sw/system_management/7x/b_6k_System_Mgmt_Config_7x/b_6k_System_Mgmt_Config_7x_chapter_010011.html#concept_B27322E2A7454...
@Bhavin Yadav wrote:can you please specify what hardware you are talking about? Is this about MDS / Nexus switches? There may be different explanations. Nexus
