About Gromophon

Gromophon · 09-16-2019

good day. ISR 4351/K9 IOS 16.09.04 i need to make "ip nat inside source static" for range 5100-5200 tcp ports. i have find code, like next: ip access-list extended 190permit tcp host 192.168.0.10 range 5100 5200 any!route-map MAP_RST permit 10match ...

Gromophon · 09-17-2019

Many thanks to Paul and Georg for the right advices. I solved the problem in a slightly different way: I found a way on the software to reduce the port range from 100 to 10, and registered the usual static translations. Not very beautiful, but very s...

Gromophon · 09-17-2019

I can not assign x.x.x.196 a primary address. Primary is other address.

Gromophon · 09-17-2019

thanks, added this code:ip nat pool RST1-pool 92.50.234.196 92.50.234.196 netmask 255.255.255.248ip nat inside source list 190 pool RST1-pool overload but ports are still available, for example 80,443 from outside

Member Since	‎09-16-2019 09:25 PM
Date Last Visited	‎09-18-2019 01:01 AM
Posts	4

User Statistics

User Activity

Translation for range tcp ports

Re: Translation for range tcp ports

Re: Translation for range tcp ports

Re: Translation for range tcp ports