About EunjinBae09320

EunjinBae09320 · 10-16-2019

Hi All, We've got an on premises server installed on our core switch (Stacked).When I tested it on a different rack switch (single), the slave was joining to the bond0 (Excuse my knowledge with the server configuration as I don't really know much abo...

EunjinBae09320 · 09-17-2019

Hi, I have factory reset the Catalyst 9200 and now I don't have IOS file there.I know it sounds dumb but can someone help me to install the IOS file there again? I have tried various things with googling, looking at Catalyst 9200 document, watching Y...

EunjinBae09320 · 10-17-2019

Hi Seb, Thanks for your response.I have updated the port channel to Active but still slave not joining from the server.Here's the current configuration. !interface Port-channel20description * SERVER MAIN COMMS *switchport access vlan 1008switchport m...

EunjinBae09320 · 09-19-2019

Hi Meheretab, Thanks for the recap. Yes that is correct.I did a bit of work around as well such as disabling all firewalls on Windows.I have bold the commands that are important. Pre set up is as below. - Tera Term used for xmodem.- Console to USB mi...

EunjinBae09320 · 09-18-2019

Hi Meheretab, Thanks for your response.I have made it work for installation.I will probably share the log file for future reference if there's anyone struggling with this. switch: dir ?usage:dir <path-to-directory>switch: dir flash:Attributes Size Na...

Member Since	‎09-17-2019 04:56 PM
Date Last Visited	‎10-24-2019 03:23 PM
Posts	5
Total Helpful Votes Received	6

User Statistics

User Activity

Port channel is not working on the Server

Catalyst 9200 IOS install

Re: Port channel is not working on the Server

Re: Catalyst 9200 IOS install

Re: Catalyst 9200 IOS install