About mohamedgiumazwali

mohamedgiumazwali · 06-02-2021

Greetings i have provided an internet service to certain customer , we provide him with 500Mbps speed , the logic said that the upload should be 500Mbps and download 500Mbps (Full duplex channel) but the problem here is 500Mbps splitted between the u...

mohamedgiumazwali · 05-20-2021

Hi GroupI'm having a Cisco ISR C1111-8P Dual GE WAN Ethernet Router in my organization today i am trying to make test speed to certain server the wan interface with the PE router is 1G also the Lan interface with my laptop is 1G directly connected ...

mohamedgiumazwali · 12-24-2020

Hi All! I had a problem which is easy to some , i have an SG350 switch topo attached below the switch connect to Panasonic PBX port gi/50 , IP phone to port gi/6 , connected to other switches from gi 1,to 5, but the phone not registering , something ...

mohamedgiumazwali · 12-10-2020

Hi All! I 've been configuring CMS 2.8 for a customer everything registered , looks fine but the problem is when making a video call between 3 participant there is no video just audio and sometimes the conference disconnect.In the CMS logs , I rec...

mohamedgiumazwali · 08-23-2021

Thanks Joe also i find out that someone has changed port-channel calculation formula for summing traffic in PRTG that is why i got wrong reads . and thanks for your reply which was very helpful.

mohamedgiumazwali · 08-22-2021

Hi joseph i apply a qos police to customer for 2.15G but when i check prtg the B.W exceed the policy and reach to 2.4G ,, it should drop traffic at 2.15 G right ! show policy-map inter x/x = (5 minute offered rate 2476238000 bps, drop rate 5220...

mohamedgiumazwali · 06-25-2021

Hello Dear i had the same issue mac flapping using QinQ i see about 500 mac addresses flapping my customer interface also with my PE trunk port, i checked some of the mac addresses with customer all belongs to him. Any suggestion.??

mohamedgiumazwali · 06-24-2021

Hi fellas In which case I should use vlan dot1q tag native I am having problem there is one customer alot of mac addresses coming from his interface it is like a storm of mac addresses and the port start flapping with my PE trunk port also I see no...

mohamedgiumazwali · 06-10-2021

i see 1min different. let is forget about monitoring part , For the txload 255/255 this happened to all interfaces , is it a bug on 7600 routers i mean it is weird kind of hardware issue or bug ? Note:-i even tried my laptop it is directly connect...

Member Since	‎09-21-2019 09:46 AM
Date Last Visited	‎12-18-2021 07:38 AM
Posts	28
Total Helpful Votes Received	20

User Statistics

User Activity

DL/UP Speed Issue

ISR C1111 8P Lan port flapping

Voice VLAN , Access VLAN, Switchport , SG350 Switch

CMS Conference Problem (no Video)

Re: Yes it means for the last 30

Re: Yes it means for the last 30

Re: Event %SW_MATM-4-MACFLAP_NOTIF

Re: Q-in-Q sample config

Re: txload and rxload relationship to input rate/output rate