About janvelgado_16

janvelgado_16 · 10-03-2018

Hello, Have anyone tried setting up a guest portal FQDN mapped into two different IP address in whic...

janvelgado_16 · 01-15-2018

Hi Scott, No such use cases present, I am just wondering what would be the effect on that procedure ...

janvelgado_16 · 01-15-2018

On our case we hit this bugCSCve57121 ( https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve57121/?re...

janvelgado_16 · 01-15-2018

Hi,As we all know, capwap tunnel is built from lightweight AP to WLC on a Unified WLAN. What are you...

janvelgado_16 · 10-18-2017

Hi Scott, what firmware were you using on your WLC? Also encountered this issue, users are complaini...

janvelgado_16 · 10-17-2017

Hi,Anyone who have encountered this bug? https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc67005/?r...

janvelgado_16 · 01-26-2017

Hi, Does Cisco WLC have an option to configure an XML API Server or equivalent command in CLI just t...

janvelgado_16 · 10-11-2016

Thanks Leo, Salamat ng marami Indeed TAC has recommended that, herewith below is his email: "After c...

janvelgado_16 · 10-10-2016

Hi All, As confirmed with TAC, it is indeed a bug issue. See link: https://tools.cisco.com/bugsearch...

janvelgado_16 · 10-06-2016

Sorry Leo, but what does that value means? All other values for Noise profile are + dBm.

janvelgado_16 · 10-06-2016

Thanks Scott, I will let you know once we have further investigated this issue with TAC. JE

janvelgado_16 · 10-06-2016

Scott, We are running a 5520 WLC (redundant) with version 8.2.111.0. is this an AP bug or WLC bug? w...

janvelgado_16 · 10-06-2016

Hi Scott, Thanks for that. Can you look at these, here is the output of the command and another AP o...

janvelgado_16 · 10-06-2016

Hi guys, I am just wondering, no client is connected on 5GHz and yet there is a very high channel ut...

janvelgado_16 · 09-13-2016

Hi guys, Given: 5520 WLC, high density access points, concrete walls. 1832 APs. TPC Version Coverage...

ISE Guest portal FQDN pointing to 2 IP Address