About janvelgado_16

janvelgado_16 · 10-03-2018

Hello, Have anyone tried setting up a guest portal FQDN mapped into two different IP address in which these two IP address corresponds to the IP address of PSN nodes? Let's say for example PSN1: 1.1.1.1 HOSTNAME: psn1ise.company.com PSN2: 1.1.1...

janvelgado_16 · 01-15-2018

Hi,As we all know, capwap tunnel is built from lightweight AP to WLC on a Unified WLAN. What are your thoughts when you disable the mac learning on the switch example on the management VLAN of AP? TIA! Jan

janvelgado_16 · 10-17-2017

Hi,Anyone who have encountered this bug? https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvc67005/?referring_site=bugquickviewredir Already upgraded the controller to 8.2.161.0 but bug is still there.. any recommended IOS version where this bug is re...

janvelgado_16 · 01-26-2017

Hi, Does Cisco WLC have an option to configure an XML API Server or equivalent command in CLI just to configure an XML API Server? I could not find any related documentations. Thanks!

janvelgado_16 · 10-06-2016

Hi guys, I am just wondering, no client is connected on 5GHz and yet there is a very high channel utilization with 0% interference. Do you know how is that possible? no problem on 2.4GHz. Im using Cisco WLC 5520 and firmware version 8.2. Is this som...

janvelgado_16 · 01-15-2018

Hi Scott, No such use cases present, I am just wondering what would be the effect on that procedure on the CAPWAP APs, will it benefit the switch by gaining less CPU utilization since MAC addresses of clients are not learned by the switch itself rath...

janvelgado_16 · 01-15-2018

On our case we hit this bugCSCve57121 ( https://bst.cloudapps.cisco.com/bugsearch/bug/CSCve57121/?reffering_site=dumpcr ) and TAC recommended us to upgrade to 8.3.133.0 MR. So far no more disconnections experienced by user. HTH, Jan

janvelgado_16 · 10-18-2017

Hi Scott, what firmware were you using on your WLC? Also encountered this issue, users are complaining because they don't want to connect and disconnect to the SSID once they are dropped. Temporary fix is changing the 2802i AP to 2600/3700 AP. JE

janvelgado_16 · 10-11-2016

Thanks Leo, Salamat ng marami Indeed TAC has recommended that, herewith below is his email: "After checking on my I found that we had a bug with same symptoms (now it’s closed since the issue is not reproducible on the latest 8.2 release) https://...

janvelgado_16 · 10-10-2016

Hi All, As confirmed with TAC, it is indeed a bug issue. See link: https://tools.cisco.com/bugsearch/bug/CSCuy97681/ Recommended action is to upgrade the WLC to the following 8.2.130.0. https://www.cisco.com/c/en/us/support/docs/wireless/wireless-la...

Member Since	‎03-30-2016 09:16 AM
Date Last Visited	‎07-12-2019 05:29 AM
Posts	19

User Statistics

User Activity

ISE Guest portal FQDN pointing to 2 IP Address

Disable mac-address learning per Vlan effect on Cisco Unified WLAN

Cisco 2802 AP drops arp packets

XML API Server

High Channel Utilzation on 5Ghz with no Client connected

Re: Disable mac-address learning per Vlan effect on Cisco Unified WLAN

Re: Client can't pass traffic at all

Re: Client can't pass traffic at all

Thanks Leo, Salamat ng marami

Hi All,