About cainram

cainram · 02-21-2020

I've used SIPmac.cnf.xml files to configure my 8845s. I have a lot of the features I need working but cannot crack this one. I've tried several settings that appear to deal with this but nothing is working. When I press UP on the navigation cluster I...

cainram · 02-07-2020

I have used SEPmac.cnf.xml files to provision my 8845s. I have BLFs working, custom wallpaper, lineMode 1 enabled, etc. So I've got a good handle on how to use the XML structure to get the behavior I'm looking for out of these phones. I cannot, howev...

cainram · 01-20-2020

The problem was with case sensitivity of the files... Everything is working as it should. Thanks to everyone that took a look I have a TFTP server running on my FusionPBX server (Debian based). It generates SEP{mac}.cnf.xml files for configuration. I...

cainram · 10-31-2019

I have several Cisco 8845 phones which I have been able to configure for SIP accounts via XML and TFTP without CUCM. I would like to configure a custom background image. Is this possible without CUCM? Could someone point me in the right direction? Al...

cainram · 10-03-2019

I have configured an 8845 via TFTP and XML to register with my FusionPBX SIP server. I can receive incoming calls but when I press any digit on the pad in an attempt to make a call, I immediately get a fast busy signal. I suspect it has something to ...

cainram · 01-21-2020

Update: Turns out the issues I was having with the Windows machines was due to the firewall settings in the Windows machines themselves. So - I can now download from the server from everything I have thrown at it EXCEPT the phones. I have also added ...

cainram · 11-01-2019

Thanks for the reply!I suppose I could have actually done some work and tried something before whining about it, lol.I was able to send the List.xml file and both png files. They are both 24 bit at 800x480 for the background and 139x109 for the thumb...

cainram · 10-04-2019

Dynamite, exactly what I needed. I can now tweak it to match our ideal dialplan, thank you

cainram · 10-02-2019

Update! I got it registered. I can receive calls. No outgoing calls. My guess is that there is no default dialplan and I have to generate one and make it available via TFTP. Working on that now. Any input is still appreciated.EDIT: I have not found t...

Member Since	‎09-26-2019 12:49 PM
Date Last Visited	‎03-02-2020 05:59 AM
Posts	11

User Statistics

User Activity

Cisco 8845 Recent calls with SIP firmware

Custom extension for Messages Button on 8845 using SIP

SOLVED: CISCO 8845 cannot download xml from my tftp server

Setting a background image on 8845 phones without CUCM

8845 phone registered with SIP server - incoming calls work, outgoing gets fast busy signal

Re: CISCO 8845 cannot download xml from my tftp server

Re: Setting a background image on 8845 phones without CUCM

Re: 8845 phone registered with SIP server - incoming calls work, outgoing gets fast busy signal

Re: Configuring an 8845 for SIP via XML and TFTP