About spjeffgricus

spjeffgricus · 01-16-2014

Greetings,I've seen multiple posts on the topic none of which appear to have a Correct Answer identified (see https://supportforums.cisco.com/thread/2079191 https://supportforums.cisco.com/thread/2058072)The request is to be able to display the orig...

spjeffgricus · 10-01-2022

Our problem was resolved with a careful inspection of the match ACL's on both ends of the tunnel. In our case, overlapping subnets were causing a problem.

spjeffgricus · 05-28-2019

I opened a TAC case and they reported this falls under bug CSCup19115. It's hard to imagine that no fix has been made available for almost 4 years now. Has anyone found another workaround besides manually adding the telephone number? Thank you, Jef...

spjeffgricus · 03-26-2019

I seem to also be running into this problem on a pair of C9300's running [Everest], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.6.5 I believe I have narrowed it down to a faulty stack cable. I will be opening a case to have the unit replac...

spjeffgricus · 04-01-2012

Did you find out the problem? We're encountering the same error message.

spjeffgricus · 02-23-2012

I too am seeing this on new 2901's running the same image with no traffic. I opened a TAC case and they pointed me to bug CSCtw90305

Member Since	‎10-20-2008 08:25 PM
Date Last Visited	‎04-05-2024 06:17 PM
Posts	10
Total Helpful Votes Received	20

User Statistics

User Activity

Caller ID displayed on UCCX Agent Phone during call presentation

Re: IKEv2 Negotiation aborted due to ERROR: Create child exchange fail

Have there been any updates to this?

Re: CSCvo12056 - C9300 - Stack cable authentication failed for cable inserted.

Unified Messaging failing on Unity Connection 8.6

2901 txload shows 255/255 even with no traffic