RussMcIntire

RussMcIntire · 09-30-2020

Config attached. BTW, even though I have both stack ports cabled, it shows chain topology and not ri...

RussMcIntire · 09-30-2020

I am sure this is an easy answer but I can't really find an explanation anywhere. We have 2 SG550x-4...

RussMcIntire · 04-28-2020

I am sorry but this does not help. I have read the guides and DHCP is working just fine on the defau...

RussMcIntire · 04-23-2020

I am working to move all devices on our network off of the default VLAN (VLAN 1). This address space...

RussMcIntire · 04-10-2020

Glenn, This worked. Any Idea why this happens? It is inconsistent across my switches.

RussMcIntire · 04-07-2020

I have several Layer 2 small business switches hosting several VLAN's. All routing is done on our fi...

RussMcIntire · 04-07-2020

After talking with Palo Alto, The issue was with the config on my firewall. It seems my switches wer...

RussMcIntire · 03-01-2020

In my lab, I have 2 Cisco SG350-10 switches connected to a Palo Alto 220 firewall. On my switches, I...

RussMcIntire · 01-27-2020

I apologize for the extremely late reply. I replied before but apparently it did not submit.It seems...

RussMcIntire · 10-03-2019

At this point, with the interface IP's the same on all the switches, traffic still routes for all VL...

RussMcIntire · 10-03-2019

So if I understand you correctly, the IP for the VLAN 1 interface should be different between all sw...

RussMcIntire · 10-03-2019

All switches will need to perform VLAN routing due to how our network is spread out. the config's ar...

RussMcIntire · 10-03-2019

I am setting up a Cisco LAB (to closely mirror our production) with a 2 catalyst 2960's, 1 3750, and...

Date Registered	‎10-03-2019 11:55 AM
Date Last Visited	‎10-01-2020 06:28 PM
Total Messages Posted	19
Total Helpful Votes Received	25

Re: SG550x port question