Hi
I have a client with about 10 000 extensions. They use extension mobility. I need to change all 10 000 extensions from 5-digit to 6-digits. Also, I would need to change the End User telephone number to reflect the new 6-digit range. Looking at the...
Hi
I have configured extension mobility on CME 9.1. However, every time a user logs into EM he has to retype his Username, the EM does not maintain his previous login Username. Does EM on CME maintain the username login in cache?
Regards,
Marcus
...
Hi I have an MX800 registered on CUCM 10.5. I have also enabled SIP between the CUCM and VCS server. However I have 3rd party VC endpoints that can only register to the VCS as H323 devices. My question is, is it possible to set up a VC session betwee...
How can I allow a range of numbers, say from 1000 to 4999, to be allowed through the call manager and CUBE then block all other numbers from outside the range? I have CUCM 9.1 and a CUBE terminating the SIP provider.Is it possible to use a translatio...
Hi JaimeIif the userID in CUCM is different from the LDAP user, the local users will remain, are we then still able to edit those local end users in 10.5? I know that in previous versions, we could not edit the local end users after after synchroniza...
I have done numerous backups but same error when I restore. My question is will new Firmware/IP Phone loads be copied into CUCM when I upgrade thus over writing existing TFTP folder with new Firmware/IP phone load files? Is it absolutely critical th...