Hi there! I have one doubt pertaining to per-packet load-sharing. In order to connect my two data-centres- A & B, Site A is having two MPLS-WAN links and Site B is having two MPLS-WAN links - one from ISP1 (30Mbps link) and the other from ISP2 (50Mbps link). I am doing static route load balancing using same AD values for both the ISPs. I have configured "ip load-sharing per-packet" on both the outgoing interfaces at site A and site B. The load is getting distributed equally across both the links but total bandwidth utilization across both the links is not going beyond 30Mbps (15 Mbps each). The combined bandwidth of both links is 80Mbps (50+30). However links are not getting fully utilized even though heavy load is there on the links. Can you please tell me how to make full use of both the wan links at both the ends? OR Can you tell me how I can distribute the traffic across both the links with full utilization without using per-packet load-sharing. Moreover, my links can be configured statically only at both the ends.
... View more