About josephbtyler

josephbtyler · 08-07-2016

Is anyone else seeing issues with their 5508 WLC on code version 8.2.111.0? We did the upgrade in order to support the new 2802/3802 access points and have been seeing some strange issues ever since. The most problematic issue has been that 3702 and ...

josephbtyler · 03-04-2014

Is it possible to reboot multiple or all wireless access points via the WLC web GUI or Cisco Prime at one time? If so, can it be scheduled? I would prefer to not have to reset each and every access point individually. Thanks!

josephbtyler · 06-21-2012

Hello,We are having a strange issue that we can't seem to track down and I was hoping someone could help point us in the right direction. Previously we were using a 3725 ISR integrated with our Hicom 300 and calls between the two were working fine, b...

josephbtyler · 06-23-2012

After some further testing, we have noticed that other PBX extensions are getting through to these same VoIP extensions. We opened a case with tac and provided them with debugs and this info. It seems as though they are hitting the same dial peers wh...

josephbtyler · 06-21-2012

Alex,We've confirmed connectivity and some calls are going through the PRi and on to the VoIP extension. For example: If a user calls from a cell phone (or dials out of the PBX) to one of the VoIP DIDs the call gets there. I've attached a debug of th...

josephbtyler · 06-21-2012

Alex,We have a dial-peer 121 specifically for 5910. Wouldn't this be doing the same thing?

josephbtyler · 06-21-2012

We are calling from 3730 (PBX) to 5910 (VoIP). Config and debug is attached.

josephbtyler · 06-21-2012

I'm gathering that information now. I should also mention that when SRST mode is in operation, it seems to work fine. It almost seems like that when it isn't working it still picks the correct dial peers, but call manager isn't accepting the 4-digit ...

Member Since	‎06-21-2012 05:58 AM
Date Last Visited	‎08-07-2019 12:17 AM
Posts	8
Total Helpful Votes Received	3

User Statistics

User Activity

Issues with 8.2.111.0 on 5508 WLC

Reboot multiple or all access points via WLC web GUI or Cisco Prime

Hicom 300 and 2951 ISR 4-Digit Dialing

Re: Hicom 300 and 2951 ISR 4-Digit Dialing

Re: Hicom 300 and 2951 ISR 4-Digit Dialing

Hicom 300 and 2951 ISR 4-Digit Dialing

Re: Hicom 300 and 2951 ISR 4-Digit Dialing

Hicom 300 and 2951 ISR 4-Digit Dialing