About Mario Lessard

Mario Lessard · 06-17-2016

Hi, I have a problem with all PPPoe spoker on my network with DMVPN. The problem is the stability of the tunnel DMVPN. All spoker with PPPoe I have a problem. When I do a ping on the spoker to the hub like this: ping [dest IP Hub] sou [local ...

Mario Lessard · 10-15-2015

Hi, I have a device that I can't add a default gateway but I want a service from this computer from an other network. So I think I have to use NAT. What I did is this: int tunnel2ip add 10.1.1.2 255.255.255.0ip nat outside int gi0/1ip add 10.1.2...

Mario Lessard · 09-20-2014

Hi, My problem is a routing problem. I would like to configure a route for VPN connections with spoker router Cisco and also I would like to create a default gateway for the ISP VPN and an other default gateway for internet provider because it's n...

Mario Lessard · 09-03-2013

Hi, I think I have a simple question. My router is basicly use to establish VPN with remote router. So, I have these line:ip route 0.0.0.0 0.0.0.0 10.131.56.1Also, for the users, the default gateway is this router. (10.131.56.4, the hub VPN)I'm us...

Mario Lessard · 10-26-2012

Hi, I would like to balance traffic on 2 route. For exemple, I have 2 router on site and to other site I have two other router. I create route between router 1 router to other router and an other route with 2 other router. So, in fact, I have two ...

Mario Lessard · 06-21-2016

Hi, Do I have to set this mtu on the virtual port for the tunnel? On the hub and the spokers? Thank you

Mario Lessard · 06-20-2016

Thanks for the answer, Presently, under dialer interface the ip mtu is 1492 and the ip tcp adjust-mss 1360. I still to receive the log Peer termination received and the ping from tunnel interface ip address is 50% of success. Presently, under tunn...

Mario Lessard · 10-16-2015

It's random ip on same subnet. But I have already nat inside and outside configure on port. So, could I use static NAT? If yes, could you send me an exemple? Thank you

Mario Lessard · 10-16-2015

For sure I can't. That's the reason of this post. I can't from Remote client but locally I could. Just from local router. The server 10.1.2.100 has no gateway. Let me know if it still possible?

Mario Lessard · 10-16-2015

I will have 4 clients in total. But I have 4 spares IPs anyways. Proxy ARP is enableWhen you say " you still can't connect" do you mean a ping? Because yes, from local router I could ping 10.1.2.100. Base on this informations, could you provide me w...

Member Since	‎10-26-2012 11:29 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	19

User Statistics

User Activity

PPPoe DMVPN mtu

NAT for no default gateway device

VPN ISP is different then internet navigation for users

route-map vs ip route 0.0.0.0 0.0.0.0

Redondant WAN routing and priority route for a specific TCP port

Hi,

Thanks for the answer,

It's random ip on same subnet

For sure I can't. That's the

I will have 4 clients in