Hi, I've got two Cisco 3620s using 2 E1 channels back-to-back, that I want to load balance over. I seem to have a choice of per-destination or per-packet. Am I right in thinking that per-packet is very CPU intensive and that the 3620 might not cope a...

Hi, does anyone have any good reference material for a Cisco 3620 with a single FE and 2CE1 ports? I want to link two of these back to back over a single megastream line (initially). All the material at Cisco re PRI seems real deep and applies more t...

Hello,Can anyone point me in the right direction for a config example for the following:Two Cisco 3620s, each with a single fastethernet and two channelised e1 PRI ISDN interfaces, linked (point-to-point) over megastream?I've never configured PRI ISD...

I have been asked to configure two Cisco 3620s to talk to each other over a megastream line. As I have mainly worked with Gigabit Ethernet, I thought a good starting point would be Config Maker. I added the two routers, both with the same PRI Network...

Is there a command under sh ip ospf that tells you where the last LSU was received from and how long ago. I swear I was using such a command a couple of weeks ago but cannot for the life of me remember what is was or if I dreamt it. The kit is a Cisc...