About spoofneted

spoofneted · 04-17-2016

Recently I've tried to remove an appended route-map that was applied to a "redistribute static" behaviour within EIGRP. I thought the following sequence of IOS commands would remove this route-map, as follows: Pre-Change ip access-list standard BLAH...

spoofneted · 11-17-2015

I currently have a point-to-point Cisco Aironet SAP1602E Wireless Bridge deployment (using RAP and MAP, Wireless Root Bridge and Non-Root Bridge) to extend a Layer 2 VLAN from one Building to another. Currently, this operates uisng Open Authenticatio...

spoofneted · 06-30-2015

I've read various posts about Resilient Ethernet Protocol (REP) sizing limitations (such as "Maximum nodes in a REP segment?"), which all talk about various numbers of Nodes per REP Segment/Ring - 16, 32 and up to 100 - as being tested, but with no h...

spoofneted · 07-29-2014

Hopefully a very easy one for someone to answer - given that the internal backplane (FWSM <-> Cat65xx) and (CSM-S <-> Cat65xx) is automatically generated, and seemingly can't be changed (i.e. our CSM-S works on Po262, or 261 and I think the FWSM is s...

spoofneted · 04-10-2014

I'm having lots of issues having so-called "Clientless-SSL-Tunnel" AnyConnect VPN sessions - that is, those which are enacted by visiting https://<ASA IP> via a Browser, and letting the Java/ActiveX plugin automatically run the AnyConnect VPN Fat Cli...

spoofneted · 08-03-2017

...and finding out if Cisco Switches support Bridge Assurance or not is no easy feat. Pretty much every non-NX-OS Switch I've connected in doesn't. For the time poor, do yourself a favour and turn it off with "spanning-tree port type normal". I hat...

spoofneted · 11-18-2016

Thanks very much for this - life saver! I had the same issue, which was made more confusing as the Crypto Map that matches the traffic to be encapsulated needed to be specified in the "Normal" way, where the ACL Src is the actual Local Network. The f...

spoofneted · 10-18-2016

Peter, Thanks - this was driving me absolutely insane with the random "PFC Identity" error the ASA kept throwing up when I tried to do this by setting my equivalent 81.137.x.x/29 Static IP Range as a DMZ Interface. Apparently that's the ASA's way of ...

spoofneted · 06-29-2016

Hieu, Thanks for this - was driving me up the bend. Doesn't make sense why I'd need it (I do - same scenario as you, only I'm managing via explicitly-defined VRF) given the whole point of the "line vty" section is to apply to remote access of the box...

spoofneted · 05-09-2016

In case anyone is interested, this (hitless removal of a "route-map" statement) is possible - but the command to do it is not intuitive. Command no redistribute static route-map BLAH If you've got extra keywords/commands in - such as "subnets" for BG...

Member Since	‎03-09-2012 06:38 AM
Date Last Visited	‎09-13-2020 11:32 AM
Posts	23
Total Helpful Votes Received	41

User Statistics

User Activity

Hitlessly removing a route-map from a redistribution statement

Cisco Aironet SAP1602E - Changing from Open to WPA-PSK via Remote Access (RAP and MAP)

Maximum officially supported (TAC) number of nodes in a REP Segment

FWSM and CSM - Naming the control-plane PortChannel

ASA5520 and ACS 4.0 - WebVPN (Clientless-SSL-Tunnel) AnyConnect doesn't apply Downloadable ACLs (dACLs)

...and finding out if Cisco

Thanks very much for this -

Peter,

Hieu,

In case anyone is interested,