I have recently changed the IP address of CW2K and now I can't get DFM to connect to the ANI server. When I check the services, the ANI server is running but the busy flag is set. I have stopped and re-started both the service and server to no avail....
Hi,I know this sounds crazy but I am finding problems linking up a Management switch to all Cisco switches on the LAN. I am linking them up using the usual crossover cable; the ports are set up for vlan 915 (inter switch/VLAN connectivity works too) ...
Hi All,I've seen a few threads related to this problem a few times here and there but no obvious answer. I'm running RME 3.4 IDU 8 and have imported the devices from ANI server. Devices include 3550, 2950, 2924XL and 4500 switches plus 2600 and 1700 ...
Hey there - nice to see Cisco all over this.I have the same issue. I'll just get my coat then...I'd try helping myself but root is locked out and the logs files are hidden. Nice.Not sure if it helps troubleshoot but Unmanaged Switch, ASAv, Server, De...
Hi Georg, I know it's an old post, forgive me please. However, for the purpose of validation of your screen copy here it looks like a STATIC route (S) and not a discovered route. You should actually see something like this *if* the route was learned ...
Hi,I get this a lot too. What I did in the end was configure the IP SLA to use a TOS (Type of Service ) value. You configure it under the ip sla object itself. e.g.ip sla 109icmp-echo 172.16.0.1 source-interface Tunnel10tos 184 timeout 6000frequency ...
Hi,I'd have thought using GLBP to create a virtual IP for all three routers would be the way to go here. This way you have a common subnet between the 3 departments and stick the three ADSL routers into that common pool with the GLBP address being th...
