Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know how to bring the vpc port-channel 10 status up, i did what i could, and tried troubleshooting myself. My topology is a single sided vpc using two Nexus 9k with one vpc member switch as my downstream device. Heres the configuration be...
i have registered a cipc (softphone) with an extension number, and added hunt group logout on the button items.i saved the changes ive made, and even reseted the phone -- the hunt group logout is not ther it definitely works on a physical phone (hand...
i have two sites one being the hq with cucm server and the branch-1 as cme. my gateway is configured with h323 and was wondering if there was any issue in my dial-peer from both sites.Calls work from CUCM to CME but not the other way round (CME to CU...
can someone help me what the issue is with my dial-peers, and to why i cant reach the extension numbers 6001,2,3 on cucm from the pstn, Router1 connected to the cucm server has a dial-peer as followeddial-peer voice 1 voipdestination-pattern 1020102...
ive got rid of extension mobility and only have hunt group logout which still doesnt appear on the softphone. i aslo moved the login down below the hunt group logout, so login is assigned to button 3 and hunt group button is now on button 2, and butt...
thanks for your help Maren. i have tried both protocols using the CIPC phone button template, and still no luck. im using cucm 11.5 please see below current config in the picture. thanks. rahim
Sorry about my late response, here is the debug voice ccapi inout on the HQ router, i called from the cme.UC-RTR(config)#do debug voice ccapi inoutvoip ccapi inout debugging is onUC-RTR(config)#UC-RTR(config)#UC-RTR(config)#UC-RTR(config)#UC-RTR(conf...
