Hi All, I've deployed Cisco 9300 (Core) and 9200 stacks (access) in my environment. Can someone provide me end-to-end QOS configuration for switch and switch-ports. Pratik Patel
Hi Cisco Engineers, I have question regrading interface requirement to create link between 2 catalyst stacks. Switch 1 is 9300-Stack of 2 switch acting as Core Switch ( L3 ) Switch 2 is 9200-Stack of 3-4 switch configured as Access Layer switch (150 ...
Please see my Layer 3 VLAN configuration. Can someone please let me know what needs to be done in order to get DHCP IP? Laptop connected to G0/1 for VLAN1XX not getting IP. interface Vlan1XXdescription SRVRVLANip address 10.10.10.1 255.255.255.0no ip...
I am trying to reuse the SG300 switch and I order to do that I need to reset and reconfigure the switch. I've tried to reset the switch and login in using 192.168.1.254 IP but had no luck at all. Please help if any one has come across the similar iss...
I'm trying to use SG220-50 as access layer switch and estiblished a trunk connection from Catalyst 2960-s Switch to it. Issue I came across is not able to ping/access the MGMT IP on SG220-50. Please let me know if someone has established a connection...
