Hello,Current our environment is the following:Core1 ---- Core2 | | Nexus5k | |N2k, N2k, N2k (FEX) ||Servers, hosts, etc..We would like to add another Nexus5k to this topology. However, it has to be a zero downti...
Hello,Currently we have a 50mb pipe with our carrier SONIC. We have signed another contract with another provider here in town (Charter) to multihome our Internet connections in an active/active configuration. We have leased our /24 space through our...
Thanks for the reply.. Here is the recent show controller t1: CRC Threshold is 320. Reported from firmware is 320. Data in current interval (801 seconds elapsed): 0 Line Code Violations, 3 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, ...
We're working on the same thing, reviving an ollld thread Any ideas if plhatri's configuration is viable for multilink PPP? We have the same configuration, dual point-to-point T1's connecting from Site A to Site B over multilink. We're having some e...
Hey Ibrahim, the configuration is almost an exact replica of the document I shared earlier.. The only difference is I grabbed the most updated Bogons from this site: http://www.team-cymru.org/Services/Bogons/http.htmlDuncan - I ended up going with tw...
Hey Dunc,Your example makes sense. Per the HSRP recommendation, do you have a configuration example for the active/active group setup? For some reason I always think of HSRP as a active/standby mechanism. This achieves the same purpose that I was goi...
Hey,1.) I will be going directly connected interfaces from DC-Edge-RT1 to DC-Edge-RT2. Since this is my iBGP connection between the two ASR's, can I use a private /30? Also, for the ASR connections to the L3 switch, I will use the 12.231.69.0/24 spac...
