About steven.wilson

steven.wilson · 03-01-2019

Are the C9200L-48P-4X able to be used with GLC-SX-MMD fibre connectors?

steven.wilson · 01-29-2016

I upgraded a CUCME to 10.5 to allow 8831s to be used on it. I have run into a software problem with the phones, it that as I was doing it remotely I didn't see the label on the botom of the phones listing the minimum software revision so I loaded and...

steven.wilson · 06-08-2012

I am trying to add 7916 Expansion modules to 7965 phones on a CUCM 5.1.3 system.I have finally gotten the firmware on the modules but the numbers do not appear. the Expansion module keep rebooting now. Do I need to change the firmware on the devices?...

steven.wilson · 10-14-2011

I have a new server that has been built using 8.5.1 and my customer needs it put on a different subnet. Unfortunately every time I change the IP address and restart it the Cisco Unified CM Administrator page won't let me log in and comes up with a da...

steven.wilson · 10-13-2011

I am upgrading a set of CUCM Pub and Sub to 8.5.1 the CUC is as above. What is the best method for upgrading as I can't seem to find it listed in Ciscounitytools COBRAS?

steven.wilson · 01-29-2016

Thanks Rob, That's the conformation that I was looking for. People were suggesting create config files in the Telephony system part of the configuration, but that didn't work. I'll be trying again on Monday, wish me luck.

steven.wilson · 01-29-2016

That thread is for a Callmanager, I have a Callmanager Express. I understand the firmware upgrade needs the interim version. I'm confused about the cli commands on the Callmanager Express

steven.wilson · 06-08-2012

Thanks Rob,I have upgraded the phone firmware to 8-3-5 to keep the disruption to a minimum. The phones are at a remote site so I changed the default back to the previous vesion to stop the rest of the phones upgrading. I then listed the phone softwar...

steven.wilson · 01-12-2012

Well done, take care.This message has been sent from my phone, please excuse any bad grammer or spelling mistakes.Steve WilsonBT iNet, Systems Engineer.

steven.wilson · 01-09-2012

Sorry, but there is no other solution to the problem. The software on the CUE module is working properly, it’d just the wrong software. The SRSV software that is running is meant to be used as a fall-back when the users natural voicemail boxes are h...

Member Since	‎04-21-2003 10:47 AM
Date Last Visited	‎03-08-2019 08:05 AM
Posts	97
Total Helpful Votes Received	28

User Statistics

User Activity

C9200L-48P-4X wiht GLC-SX-MMD

8831 on a CUCME

CUCM5.1.3.7000-5 + 7965(SCCP45.8-3-2S) + 7916(B016-1-0-3)

Changing the IP Address of a CUCM 8.5.1

upgrade process for CUC 2.1.0.9901-362 to version suitable for CUCM 8.5.1

Thanks Rob,

That thread is for a

CUCM5.1.3.7000-5 + 7965(SCCP45.8-3-2S) + 7916(B016-1-0-3)

Re: CUCME 8.5 and CUE 8.0 warning message

Re: CUCME 8.5 and CUE 8.0 warning message