Hi there,First of all, I'm unsure whether I should place this question in here or in the small business forum - sorry for that.Hardware:Cisco SG350X-48Software:1.6.2.30018Recently we acquired a substantial amount of Cisco SG350X devices.From what I c...
Hi there.Testing some features in Cisco ASA SSL VPN(Clientless). But when i connect to the portal, trying to login i get the following error, anybody seen this before?It works if i ADD a ACL to the DAP, but dosn't if there is only a WEBACL applied??I...
Hi there.Got a very simple Site to Site VPN setup.LAN1, 172.16.0.0/24 |----ASA-----------------| INTERNET |-----------------ASA----|192.168.0.0/24, LAN2Is it some what possible to restrict access from LAN1 -> LAN2 over VPN.How is this done? And on wh...
Hi there.Is it possible for one to access a clientless portal/Anyconnect VPN, login using only the initials and not the full domain name?In a multiple user/domain environment?Example:test instead of testdomain/testCan the ASA pass the full name testd...
Hi.I've got a pair of ASA5510, who recently experienced a power failure.The "cluster" got back up and working again.But I'm experiencing a weird issue. If i try to edit a bookmark a get the following:ERROR: % Command not executed because 'show impor...
Hi @elbert001
For now I have created my own python web app based on "Open PnP", with that I can upgrade software and deploy config for the switches(Using PnP).
I did not get option 42 to work, so I went ahead with pnpserver.<DOMAIN>.<TLD> , by defa...
Hi Sander.I have just tested the 9.2(2) on a 5515-X.The problem still exists on the new firmware, sadly..I'll try to see if i can get any confirmation from Cisco the next weeks. Regards,Søren
Hi Jan.I'm aware of that, it's just that Cisco's site states the following:"An ACL that is used for a vpn-filter must not also be used for an interface access-group."http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliance...
Hi Jan.Great that was my initial thought.But i'm not sure how to implement this ACL.I've read some places that the acl needs to be placed on the "outside" interface?And i've read other places that it need's to be placed under the tunnelgroup?Here is ...
