Hi, I'm doing a packet tracer exercise for my ccna at uni. Here's the running config,Router#show runBuilding configuration... Current configuration : 1269 bytes!version 15.4no service timestamps log datetime msecno service timestamps debug datetime m...
Thanks for helping. I've set a static route on r1 "ip route 192.168.1.0 255.255.255.0 g0/0/0" and 0.0.0.0 0.0.0.0 g0/0/0 still not working. g0/0/0 is the interface of my gre tunnel.
Could it be the way I have g0/2/0 configured? Anywho, this exercise is divided into 4 tasks and worth 20%. This is task 3 (worth 5%), configure a gre tunnel (which I have, and its working I've tested using traceroute) but it says configure the pc's a...
Ok so changing the default gateway on the pc didn't make any difference. Here's OSPF databaseRouter#show ip ospf daOSPF Router with ID (10.10.10.10) (Process ID 100) Router Link States (Area 0) Link ID ADV Router Age Seq# Checksum Link count5.5.5.5 5...
99.0.0.33 is the gateway for the pc, interface 0/0/0 or should it be 0/2/0? I can't give that interface an IP address so should I give the address of the vlan 1?. I can ping every interface on R1 from the pc. No, other devices can't ping 99.0.0.4. we...
